是否进口:否 | 产地:河北 | 材质:DR-8 |
产地/厂家:首钢 | 仓库所在城市:唐山 | 仓库:首铁 |
计重方式:理计 | 质量等级:一级 | 用途范围:金属制品、 家用电器、 餐饮厨具、 日用电器 |
加工服务:粗加工(开平、分条等) | 配送服务:可配送到厂 | 货物销售类型:现货 |
规格:0.14*855 | 货号:XB120216900202 | 仓库地址:曹妃甸 |
仓库电话:19931425474 | 卷径:508/610 | 卷重:4.415 |
金属铬层(每面) Metallic Chromium Layer(one side)
| 氧化物铬层(每面) Chromium Oxide Layer(one side)
| ||
最小平均重量 Minimum Average Coating Weight Coating Weight
| 平均重量 Maximum Average Coating Weigh
| 最小平均重量 Minimum Average Coating Weight
| 平均重量 Maximum Average Coating Weigh
|
50 mg/m2
| 140 mg/m2
| 5 mg/m2
| 35 mg/m2 |
原板类型 Black Plate
| 代号 Code
| 表面状态 Surface finishes
|
特征 Features
|
一次冷轧 Single reduce
| B
| 光亮表面 Bright surface
| 在具有极细磨石花纹的光滑表面的原板上镀锡后进行锡的软熔处理得到的有光泽的表面。 Luster surface obtained by reflow treatment after tin coating for base plate with extremely fine stone figures. |
R|R2
| 石纹表面 Stone surface
| 在具有一定方向性的磨石花纹为特征的原板上镀锡后进行锡的软熔处理得到的有光泽的表面,R2 表面粗糙度略高于 R 表面。 Luster surface obtained by reflow treatment after tin coating for base plate featuring with certain oriented stone figures. Roughness of R2 is higher than R. | |
S
| 银色表面 Silver surface
| 在具有粗糙无光泽表面的原板上镀锡后进行锡的软熔处理得到的有光泽的表面。 Luster surface obtained by reflow treatment after tin coating for base plate featuring with rough and matt suface. | |
M
| 无光表面 Matte surface
| 在具有一般无光泽表面的原板上镀锡后不进行锡的软熔处理的无光表面。 Matt surface without reflowing treatment after tin coating for base plate with matt surface. | |
二次冷轧 Double reduce
| R
| 石纹表面 Stone surface
| 在具有一定方向性的磨石花纹为特征的原板上镀锡后进行锡的软熔处理得到的有光泽的表面。 Luster surface obtained by reflow treatment after tin coating for base plate with certain oriented stone figures. |
M
| 无光表面 Matte surface
| 在具有一般无光泽表面的原板上镀锡后不进行锡的软熔处理的无光泽表面。 Matt surface of general matt raw material strip without reflowing treatment. |